Filter
Top Products
DHCP and UDP Commands
208967-B 2-5
show ports dhcp-relay Commands
These commands display information about DHCP on the port.
show ports info dhcp-relay Command
The
show ports info dhcp-relay command displays the DHCP parameters for
a specified port or all ports.
The command uses the format:
show ports info dhcp-relay [<ports>]
Figure 2-3 is a sample display.
Passport-8610# show ports info dhcp-relay
================================================================================
Port Dhcp
================================================================================
PORT_NUM ENABLE MAX_HOP MIN_SEC MODE ALWAYS_BROADCAST
--------------------------------------------------------------------------------
9/1 false 4 0 both false
9/2 true 4 0 both false
9/3 false 4 0 both false
9/4 false 4 0 both false
9/5 false 4 0 both false
9/6 false 4 0 both false
9/7 false 4 0 both false
Figure 2-3.
show ports info dhcp-relay
Command (Partial Output)
show ports stats dhcp-relay Command
The
show ports stats dhcp-relay command displays DHCP statistics for a
specified port or for all ports.
The command uses the syntax:
show ports stats dhcp-relay [<ports>]
Figure 2-4 is a sample display.
cli.book Page5 Wednesday,April19, 2000 3:14PM