![](http://pdfasset.owneriq.net/3/88/3884ec60-08cc-bac4-b176-2f6590d63c88/3884ec60-08cc-bac4-b176-2f6590d63c88-bg65.png)
General Configuration Command Set
Setting Basic Device Properties
Matrix NSA Series Configuration Guide 2-75
2.2.3.26 set system name
Use this command to configure a name for the system.
set system name [string]
Syntax Description
Command Defaults
If string is not specified, the system name will be cleared.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the system name to Information Systems:
string (Optional) Specifies a text string that identifies the system.
NOTE: A name string containing a space in the
text must be enclosed in quotes as shown in the
example below.
Matrix(rw)->set system name “Information Systems”