![](http://pdfasset.owneriq.net/3/88/3884ec60-08cc-bac4-b176-2f6590d63c88/3884ec60-08cc-bac4-b176-2f6590d63c88-bg130.png)
Port Configuration Command Set
Configuring Link Traps and Link Flap Detection
4-68 Matrix NSA Series Configuration Guide
4.3.8.2 set port trap
Use this command to enable or disable ports for sending SNMP trap messages when their link status
changes.
set port trap port-string {enable | disable}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to disable link traps for Fast Ethernet port 3 in port group 3:
port-string Specifies the port(s) for which to enable or disable link trap
messages. For a detailed description of possible port-string
values, refer to Section 4.1.1.
enable | disable Enables or disables link traps.
Matrix(rw)->set port trap fe.3.3 disable