![](http://pdfasset.owneriq.net/3/88/3884ec60-08cc-bac4-b176-2f6590d63c88/3884ec60-08cc-bac4-b176-2f6590d63c88-bg86.png)
General Configuration Command Set
Managing Configuration and Image Files
2-108 Matrix NSA Series Configuration Guide
2.2.8.1 dir
Use this command to list files stored in the file system.
dir [filename]
Syntax Description
Command Type
Switch.
Command Mode
Read-Only.
Command Defaults
If filename is not specified, all files in the system will be displayed.
Example
This example shows how to list all the files in the system:
Table 2-8 provides an explanation of the command output.
filename (Optional) Specifies the file name or directory to list.
Table 2-8 dir Output Details
Output What It Displays...
Images Lists all the images resident in the chassis and information
about each.
Filename Name of the image file stored in the local file system.
Various flags may be listed after the filename, including:
• (active) - Indicates this image is currently running.
• (boot) - Indicates this image is selected to boot on the
next reset.
Version Firmware version of the image.
Size Size of image file in the local file system.
Date Date of image file in the local file system.
CheckSum MD5 checksum calculated across the entire image file, used
for image identity and verification.