![](http://pdfasset.owneriq.net/3/88/3884ec60-08cc-bac4-b176-2f6590d63c88/3884ec60-08cc-bac4-b176-2f6590d63c88-bg83.png)
General Configuration Command Set
Starting and Configuring Telnet
Matrix NSA Series Configuration Guide 2-105
2.2.7.5 set router telnet
Use this command to enable or disable Telnet service to the router interface IP address.
set router telnet {enable | disable}
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to disable Telnet service to the router:
Matrix(rw)->set router telnet disable