General Configuration Command Set
Setting User Accounts and Passwords
2-34 Matrix NSA Series Configuration Guide
2.2.1.8 show system lockout
Use this command to display settings for locking out users after failed attempts to log in to the
system.
show system lockout
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Super User.
Example
This example shows how to display user lockout settings. In this case, device defaults have not been
changed:
Table 2-5 provides an explanation of the command output. These settings are
configured with the set system lockout command (Section 2.2.1.9).
Matrix(su)->show system lockout
Lockout attempts: 3
Lockout time: 15 minutes.
Table 2-5 show system lockout Output Details
Output What It Displays...
Lockout attempts Number of failed login attempts allowed before a
read-write or read-only user’s account will be disabled.
Lockout time Number of minutes the default admin user account will be
locked out after the maximum login attempts.