Filter
Top Products
Configuring LACP
Configuring Link Aggregation
4-114 Matrix NSA Series Configuration Guide
Examples
This example shows how to display detailed LACP status information
for port fe.1.12:
This example shows how to display summarized LACP status information for port fe.1.12:
Matrix(rw)-> show port lacp port fe.1.12 status detail
Port Instance: fe.1.12
ActorPort: 1411 PartnerAdminPort: 1411
ActorSystemPriority: 32768 PartnerOperPort: 1411
ActorPortPriority: 32768 PartnerAdminSystemPriority: 32768
ActorAdminKey: 32768 PartnerOperSystemPriority: 32768
ActorOperKey: 32768 PartnerAdminPortPriority: 32768
ActorAdminState: -----GlA PartnerOperPortPriority: 32768
ActorOperState: -F----lA PartnerAdminKey: 1411
ActorSystemID: 00-e0-63-9d-b5-87 PartnerOperKey: 1411
SelectedAggID: none PartnerAdminState: --DCSGlp
AttachedAggID: none PartnerOperState: --DC-Glp
MuxState: Detached PartnerAdminSystemID: 00-00-00-00-00-00
DebugRxState: port Disabled PartnerOperSystemID: 00-00-00-00-00-00
NOTES: State definitions, such as ActorAdminState and Partner AdminState, are
indicated with letter abbreviations. If the show port lacp command displays one or
more of the following letters, it means the state is true for the associated actor or partner
ports:
E = Expired; F = Defaulted; D = Distributing (tx enabled); C = Collecting (rx enabled);
S = Synchronized (actor and partner agree); G = Aggregation allowed; S/l = Short/Long
LACP timeout; A/p = Active/Passive LACP.
For more information about these states, refer to set port lacp (Section 4.5.4.13) and
the IEEE 802.3 2002 specification.
Matrix(rw)->show port lacp port fe.1.12 status summary
Port Aggr Actor System Partner System
Pri: System ID: Key: Pri: System ID: Key:
fe.1.12 none
[(32768,00e0639db587,32768),(32768,000000000000, 1411)]