![](http://pdfasset.owneriq.net/3/88/3884ec60-08cc-bac4-b176-2f6590d63c88/3884ec60-08cc-bac4-b176-2f6590d63c88-bg514.png)
Security Configuration Command Set
Configuring Multiple Authentication
14-140 Matrix NSA Series Configuration Guide
14.3.10.6 set multiauth port
Use this command to set multiple authentication properties for one or more ports.
set multiauth port mode {auth-opt | auth-reqd | force-auth | force-unauth} |
numusers numusers port-string
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Examples
This example shows how to set the port multiple authentication
mode to required on ge.3.14:
mode auth-opt |
auth-reqd |
force-auth |
force-unauth
Specifies the port(s)’ multiple authentication mode as:
• auth-opt — Authentication optional
• auth-reqd — Authentication required
• force-auth — Authentication considered
• force-unauth — Authentication disabled
numusers
numusers
Specifies the number of users allowed authentication on
port(s).
port-string Specifies the port(s) on which to set multiple authentication
properties.
Matrix(rw)->set multiauth port mode auth-reqd ge.3.14