![](http://pdfasset.owneriq.net/3/88/3884ec60-08cc-bac4-b176-2f6590d63c88/3884ec60-08cc-bac4-b176-2f6590d63c88-bg9b.png)
General Configuration Command Set
Resetting the Device
Matrix NSA Series Configuration Guide 2-129
2.2.11.2 reset
Use this command to reset the device without losing any user-defined configuration settings or to
display information about device resets.
reset {[mod | system | nemcpu {mod.nemcpu}] [cancel]}
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Examples
This example shows how to reset the system.
NOTE: A Matrix Series device can also be reset with the RESET button located on its
front panel. For information on how to do this, refer to the Matrix Installation Guide
shipped with your device.
mod Specifies a module to be reset.
system Resets the system.
nemcpu
mod.nemcpu
Resets the CPU on a Matrix Security Module or other
processing NEM, where mod specifies the DFE module in
which the Matrix Security Module or processing NEM is
installed and nemcpu specifies the location of the NEM.
Currently, this value can only be 1.
cancel Cancels a reset scheduled using the reset at command as
described in Section 2.2.11.3, or the reset in command as
described in Section 2.2.11.4.
Matrix(rw)->reset
This command will reset the system and may disconnect your telnet session.
Do you want to continue (y/n) [n
]? y
Resetting...