![](http://pdfasset.owneriq.net/3/88/3884ec60-08cc-bac4-b176-2f6590d63c88/3884ec60-08cc-bac4-b176-2f6590d63c88-bgfb.png)
Port Configuration Command Set
Setting Console Port Properties
Matrix NSA Series Configuration Guide 4-15
4.3.1.10 set console bits
Use this command to set the number of bits per character for one or more console ports.
set console bits num-bits [port-string]
Syntax Description
Command Defaults
If port-string is not specified, bits per character will be set for all console ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set bits per character to 5 for console port com.1.1:
num-bits Specifies the number of bits per character. Valid values are 5, 6,
7, and 8.
port-string (Optional) Sets bits per character for specific console port(s).
Matrix(rw)->set console bits 5 com.1.1