![](http://pdfasset.owneriq.net/3/88/3884ec60-08cc-bac4-b176-2f6590d63c88/3884ec60-08cc-bac4-b176-2f6590d63c88-bg30c.png)
Logging And Network Management Command Set
Configuring SMON
11-38 Matrix NSA Series Configuration Guide
11.2.3.1 show smon priority
Use this command to display SMON user priority statistics. SMON generates aggregated statistics
for IEEE 802.1Q VLAN environments.
show smon priority [port-string] [priority priority]
Syntax Description
Command Defaults
• If port-string is not specified, SMON statistics for all ports will be displayed.
• If priority is not specified, statistics for all priority queues will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display SMON priority 0 statistics for 1-Gigabit Ethernet port 14 in
port group 3
:
port-string (Optional) Displays SMON priority statistics being
collected by specific port(s). For a detailed description of
possible port-string values, refer to Section 4.1.1.
priority priority (Optional) Displays SMON statistics based on encoded user
priority, Valid values are 0 - 7.
Matrix(rw)->show smon priority ge.3.14 0
Show Priority Statistics
------------------------
Interface = ge.3.14
Owner = none
Creation = 0 days 0 hours 6 minutes 39 seconds
Status = enabled
--------------------
Priority 0 Packets Octets
----------
Total 7981308 2332402460
Overflow 0 0