Filter
Top Products
Discovery Protocols Command Set
Link Layer Discovery Protocol and LLDP-MED
3-36 Matrix NSA Series Configuration Guide
Network Policy
(app/tag/vlanId/cos/dscp)
LLDP-MED Extensions Network Policy TLV. For all applications
enabled on the port to be transmitted in a TLV, displays the
application name, VLAN type (tagged or untagged), VLAN Id,
and both the Layer 2 and Layer 3 priorities assiciated with the
application.
ECS ELIN LLDP-MED Extensions Location Identification TLV. Emergency
Call Services (ECS) Emergency Location Identification Number
(ELIN) is currently the only type supported. Value is the ELIN
configured on this port.
PoE Device LLDP-MED Extensions Extended Power via MDI TLV.
Displayed only when a port has PoE capabilities. Value is the
Power Type of the device. On a Matrix switch port, the value is
Power Sourcing Entity (PSE).
PoE Power Source LLDP-MED Extensions Extended Power via MDI TLV.
Displayed only when a port has PoE capabilities. Value can be
primary or backup, indicating whether the PSE is using its primary
or backup power source.
PoE MDI
Supported/Enabled
IEEE 802.3 Extensions Power via MDI TLV. Displayed only
when a port has PoE capabilities. Indicates whether sending the
Power via MDI TLV is supported/enabled. Value can be yes or no.
PoE Pair Controllable/Used IEEE 802.3 Extensions Power via MDI TLV. Displayed only
when a port has PoE capabilities. Indicates whether pair selection
can be controlled on the given port (refer to RFC 3621). Value for
Controllable can be true or false. Value of Used can be signal
(signal pairs only are in use) or spare (spare pairs only are in use).
PoE Power Class IEEE 802.3 Extensions Power via MDI TLV. Displayed only
when a port has PoE capabilities. Indicates the power class
supplied by the port. Value can range from 0 to 4.
Table 3-4 show lldp port local-info Output Details
Output Field What it Displays ...