Spanning Tree Configuration Command Set
Configuring Spanning Tree Port Parameters
6-102 Matrix NSA Series Configuration Guide
6.2.2.10 show spantree portpri
Use this command to show the Spanning Tree priority for one or more ports. Port priority is a
component of the port ID, which is one element used in determining Spanning Tree port roles.
show spantree portpri [port port-string] [sid sid]
Syntax Description
Command Defaults
• If port-string is not specified, port priority will be displayed for all Spanning
Tree ports.
• If sid is not specified, port priority will be displayed for Spanning Tree 0.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the port priority for fe.2.7:
port port-string (Optional) Specifies the port(s) for which to display
Spanning Tree priority. For a detailed description of
possible port-string values, refer to Section 4.1.1.
sid sid (Optional) Displays port priority for a specific Spanning
Tree identifier. Valid values are 0 - 4094. If not specified,
SID 0 is assumed.
Matrix(rw)->show spantree portpri port fe.2.7
Port fe.2.7 has a Port Priority of 128 on SID 0