Enterasys Networks N Standalone (NSA) Series Switch User Manual


  Open as PDF
of 1372
 
Logging And Network Management Command Set
Configuring Node Aliases
11-142 Matrix NSA Series Configuration Guide
11.2.7.2 show nodealias mac
Use this command to display node alias entries based on MAC address and protocol.
show nodealias mac mac_address [ip | apl | mac | hsrp | dhcps | dhcpc | bootps |
bootpc | ospf | vrrp | ipx | xrip | xsap | ipx20 | rtmp | netBios | nbt | bgp | rip |
igrp | dec | bpdu | udp] [port-string]
Syntax Description
mac_address Specifies a MAC address for which to display node alias
entries. This can be a full or partial address.
ip | apl | mac |
hsrp | dhcps |
dhcpc | bootps |
bootpc | ospf |
vrrp | ipx | xrip |
xsap | ipx20 |
rtmp | netBios |
nbt | bgp | rip |
igrp | dec | bpdu |
udp
(Optional) Displays node alias entries for one of the
following protocols:
Internet Protocol
Appletalk
Media Access Control
Hot Standby Routing Protocol
Dynamic Host Control Protocol Server
Dynamic Host Control Protocol Client
Boot Protocol Server
Boot Protocol Client
Open Shortest Path First
Virtual Router Redundancy Protocol
Internet Packet Exchange
IPX Routing Information Protocol
IPX Service Access Point
PX Protocol 20 packet
Routing Table Maintenance Protocol
NetBIOS (raw)
NetBIOS (over TCP/IP)
Border Gateway Protocol
Routing Information Protocol
Interior Gateway Routing Protocol
Digital Equipment Corporation
Bridge Protocol Data Unit
User Datagram Protocol
port-string (Optional) Displays node alias properties for specific
port(s). For a detailed description of possible port-string
values, refer to Section 4.1.1.