IP Configuration Command Set
Configuring Dynamic Host Configuration Protocol (DHCP)
12-122 Matrix NSA Series Configuration Guide
12.2.9.9 netbios-name-server
Use this command to assign one or more NetBIOS WINS servers to DHCP clients.
netbios-name-server address [address2...address8]
Syntax Description
Command Syntax of the “no” Form
The “no” form of this command deletes the NetBIOS WINS server list:
no netbios-name-server
Command Type
Router command.
Command Mode
Any DHCP configuration mode.
Command Defaults
If address2...address8 is not specified, no additional addresses will be configured.
Example
This example shows how to assign a NetBIOS WINS server at 13.12.1.90 to the “localpool” address
pool:
address Specifies the IP address of a NetBIOS WINS server.
address2...
address8
(Optional) Specifies, in order of preference, up to 7
additional NetBIOS WINS server IP address(es).
Matrix>Router1(config)#ip dhcp pool localpool
Matrix>Router1(config-dhcp-pool)#netbios-name-server 13.12.1.90