Startup and General Configuration Summary
Starting and Navigating the Command Line Interface
2-16 Matrix NSA Series Configuration Guide
2.1.6.8 Displaying Scrolling Screens
If the CLI screen length has been set using the set length command as described in Section 2.2.3.30,
CLI output requiring more than one screen will display
--More-- to indicate continuing screens.
To display additional screen output:
• Press any key other than ENTER to advance the output one screen at a time.
• Press ENTER to advance the output one line at a time.
The example in Figure 2-5 shows how the show mac command indicates that output continues on
more than one screen.
Figure 2-5 Scrolling Screen Output
NOTE: At the end of the lookup display, the system will repeat the command you
entered without the ?.
Matrix(rw)->show mac
MAC Address FID Port Type
----------------------------------------------------------
00-00-1d-67-68-69 1 host.0.1 learned
00-00-02-00-00-00 1 fe.1.2 learned
00-00-02-00-00-01 1 fe.1.3 learned
00-00-02-00-00-02 1 fe.1.4 learned
00-00-02-00-00-03 1 fe.1.5 learned
00-00-02-00-00-04 1 fe.1.6 learned
00-00-02-00-00-05 1 fe.1.7 learned
00-00-02-00-00-06 1 fe.1.8 learned
00-00-02-00-00-07 1 fe.1.9 learned
00-00-02-00-00-08 1 fe.1.10 learned
--More--