Policy Classification Configuration Command Set
Configuring Policy Class of Service (CoS)
Matrix NSA Series Configuration Guide 8-53
8.3.3.5 show cos port-config
Use this command to display Class of Service port group configurations.
show cos port-config [irl | txq] [group-type-index]
Syntax Description
Command Defaults
If not specified, all rate limiting information for all port types will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
irl | txq (Optional) Displays inbound rate limiting or transmit
queue information.
group-type-index (Optional) Displays information for a specific port
group/type index. Valid entries are in the form of
group.type. Group can be 0-7, with 0 designating the
default group, and 1-7 reserved for user-defined groups.
Default port type values cannot be changed, and are 0 for
the Matrix DFE-Platinum 7G4270-12 module, and 1 for
all other modules.