VLAN Configuration Command Set
Assigning Port VLAN IDs (PVIDs) and Ingress Filtering
Matrix NSA Series Configuration Guide 7-23
7.3.3.10 set port discard
Use this command to set the frame discard mode on one or more ports.
set port discard port-string {tagged | untagged | none | both}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set Fast Ethernet port 7 in port group 2 to discard both tagged and
untagged frames:
port-string Specifies the port(s) for which to set frame discard mode.
For a detailed description of possible port-string values,
refer to Section 4.1.1.
tagged | untagged
| none | both
Sets the port(s) to discard tagged or untagged frames, no
frames, or both types of frames.
Matrix(rw)->set port discard fe.2.7 both