Port Configuration Command Set
Reviewing Port Status
4-26 Matrix NSA Series Configuration Guide
Table 4-1 show port status Output Details
Output What It Displays...
Port Port designation. For a detailed description of possible
port-string values, refer to Section 4.1.1.
Alias (truncated) Alias configured for the port. For details on using the set
port alias command, refer to Section 4.3.3.3.
Oper Status Operating status (up or down).
Admin Status Whether the specified port is enabled (up) or disabled
(down). For details on using the set port disable command
to change the default port status of enabled, refer to
Section 4.3.3.1. For details on using the set port enable
command to re-enable ports, refer to Section 4.3.3.2.
Speed Operational speed in Mbps or Kbps of the specified port.
For details on using the set port speed command to change
defaults, refer to Section 4.3.4.2.
Duplex Duplex mode (half or full) of the specified port. For details
on using the set port duplex command to change defaults,
refer to Section 4.3.6.
Type Physical port and interface type.