Logging And Network Management Command Set
Configuring RMON
11-80 Matrix NSA Series Configuration Guide
11.2.4.23 show rmon matrix
Use this command to display RMON matrix properties and statistics. The RMON matrix stores
statistics for conversations between sets of two addresses.
show rmon matrix [port-string] [source | dest]
Syntax Description
Command Defaults
• If port-string is not specified, information about all ports will be displayed.
• If not specified, information about source and destination addresses will be
displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display RMON matrix properties and statistics. A control entry displays
first, followed by actual entries corresponding to the control entry:
port-string (Optional) Displays RMON properties and statistics for a
specific port(s).
source | dest (Optional) Sorts the display by source or destination
address.
Matrix(rw)->show rmon matrix
------------------
Matrix Index 1
Interface 32009
Table size 100
Last deletion 116647
Status 1
Owner monitor
Source 00-e0-63-9d-c1-c8 Destination 00-a0-c9-03-cd-7c
Packets = 2 Octets = 286
Errors = ---