IP Configuration Command Set
Configuring Load Sharing Network Address Translation (LSNAT)
12-106 Matrix NSA Series Configuration Guide
12.2.8.25 show router limits
Use this command to display LSNAT router limits.
show router limits [lsnat-bindings] | [lsnat-cache] | [lsnat-configs]
Syntax Description
Command Type
Switch command.
Command Mode
Read-Only.
Command Defaults
If no options are specified, all router limits will be displayed.
Example
This example shows how to display the LSNAT cache size:
NOTE: This command must be executed from the switch CLI.
lsnat-bindings (Optional) Displays the LSNAT maximum bindings limit.
lsnat-cache (Optional) Displays the LSNAT cache size limit.
lsnat-configs (Optional) Displays the LSNAT configuration limit.
Matrix(rw)->show router limits lsnat-cache
LSNAT Cache size - 2000 (default)