Filter
Top Products
Discovery Protocols Command Set
Link Layer Discovery Protocol and LLDP-MED
3-40 Matrix NSA Series Configuration Guide
3.2.4.8 show lldp port network-policy
Use this command to display LLDP port network policy configuration information. Network policy
information is configured using the set lldp port network-policy command.
show lldp port network policy {all | voice | voice-signaling | guest-voice |
guest-voice-signaling | software-voice | video-conferencing | streaming-video |
video-signaling } [port-string]
Syntax Description
Command Defaults
If port-string is not specified, only non-default values will be displayed for all ports
that have non-default values configured.
If a port-string is specified, then all values, default and non-default, are displayed
for the specified ports.
all Display information about all network policy
applications.
voice Display information about only the voice application
type.
voice-signaling Display information about only the voice signaling
application type.
guest-voice Display information about only the guest voice
application type.
guest-voice-signaling Display information about only the guest voice
signaling application type.
software-voice Display information about only the softphone voice
application type.
video-conferencing Display information about only the video conferencing
application type.
streaming-video Display information about only the streaming video
application type.
video-signaling Display information about only the video signaling
application type.
port-string (Optional) Displays information about LLDP network
policy for one or a range of ports.