Discovery Protocols Command Set
Link Layer Discovery Protocol and LLDP-MED
3-64 Matrix NSA Series Configuration Guide
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example disables the management address, MED capability, MED network policy, and MED
location identification TLVs from being sent in LLDPDUs by port ge.1.1.
poe Disable the Power via MDI IEEE 802.3 Extensions TLV
from being transmitted in LLDPDUs. Only valid for
PoE-enabled ports.
link-aggr Disable the Link Aggregation IEEE 802.3 Extensions
TLV from being transmitted in LLDPDUs.
max-frame Disable the Maximum Frame Size IEEE 802.3 Extensions
TLV from being transmitted in LLDPDUs.
med-cap Disable the LLDP-MED Capabilities TLV from being
transmitted in LLDPDUs.
med-pol Disable the LLDP-MED Network Policy TLV from being
transmitted in LLDPDUs.
med-loc Disable the LLDP-MED Location Identification TLV
from being transmitted in LLDPDUs.
med-poe Disable the LLDP-MED Extended Power via MDI TLV
from being transmitted in LLDPDUs. Only valid for
PoE-enabled ports.
port-string Specifies the port or range of ports to be affected.
Matrix(rw)->clear lldp port tx-tlv mgmt-addr med-cap med-pol med-loc ge.1.1