![](http://pdfasset.owneriq.net/3/88/3884ec60-08cc-bac4-b176-2f6590d63c88/3884ec60-08cc-bac4-b176-2f6590d63c88-bg9f.png)
General Configuration Command Set
Resetting the Device
Matrix NSA Series Configuration Guide 2-133
2.2.11.5 clear config
Use this command to clear the user-defined switch and router configuration parameters for one or
more modules. Executing clear config on one Matrix module resets that module back to its factory
defaults. For a list of factory device default settings, refer to Section 2.1.1.
clear config mod-num | all
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to clear configuration parameters in all modules:
NOTE: This command will not affect the IP address.
mod-num | all Clears configuration parameters in a specific module or in
all modules.
Matrix(rw)->clear config all