Logging And Network Management Command Set
Configuring RMON
Matrix NSA Series Configuration Guide 11-63
11.2.4.11 show rmon event
Use this command to display RMON event entry properties.
show rmon event [index]
Syntax Description
Command Defaults
If index is not specified, information about all RMON entries will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display RMON event entry 3:
Table 11-8 provides an explanation of the command output.
index (Optional) Displays RMON properties and log entries for a
specific entry index ID.
Matrix(rw)->show rmon event 3
Index 3
----------------
Owner = Manager
Status = valid
Description = STP Topology change
Type = log-and-trap
Community = public
Last Time Sent = 0 days 0 hours 0 minutes 37 seconds
Table 11-8 show rmon event Output Details
Output What It Displays...
Index Index number for this event entry.
Owner Text string identifying who configured this entry.
Status Whether this event entry is enabled (valid) or disabled.