Port Configuration Command Set
Setting Console Port Properties
4-8 Matrix NSA Series Configuration Guide
4.3.1.3 show console baud
Use this command to display the baud rate for one or more console ports.
show console baud [port-string]
Syntax Description
Command Defaults
If port-string is not specified, baud rate for all console ports will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the baud rate for console port com.1.1:
port-string (Optional) Displays baud rate for specific console port(s).
Matrix(rw)->show console baud com.1.1
Port Baud
------------ --------
com.1.1 38400