Filter
Top Products
Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
Matrix NSA Series Configuration Guide 6-11
Root Forward Delay Amount of time (in seconds) the root device spends in
listening or learning mode.
Bridge ID MAC Address Unique bridge MAC address, recognized by all bridges in
the network.
Bridge ID Priority Bridge priority, which is a default value, or is assigned using
the set spantree priority command. For details, refer to
Section 6.2.1.25.
Bridge Max Age Maximum time (in seconds) the bridge can wait without
receiving a configuration message (bridge “hello”) before
attempting to reconfigure. This is a default value, or is
assigned using the set spantree maxage command. For
details, refer to Section 6.2.1.34.
Bridge Hello Time Amount of time (in seconds) the bridge sends BPDUs. This
is a default value, or is assigned using the set spantree hello
command. For details, refer to Section 6.2.1.31.
Bridge Forward Delay Amount of time (in seconds) the bridge spends in listening
or learning mode. This is a default value, or is assigned
using the set spantree fwddelay command. For details,
refer to Section 6.2.1.37.
Topology Change Count Number of times topology has changed on the bridge.
Time Since Top Change Amount of time (in days, hours, minutes and seconds) since
the last topology change.
Max Hops Maximum number of hops information for a particular
Spanning Tree instance may traverse (via relay of BPDUs
within the applicable MST region) before being discarded.
This is a default value, or is assigned using the set spantree
mashops command. For details, refer to Section 6.2.1.52.
Table 6-1 show spantree Output Details (Continued)
Output What It Displays...