Filter
Top Products
Policy Classification Configuration Command Set
Assigning Classification Rules to Policy Profiles
Matrix NSA Series Configuration Guide 8-23
8.3.2.1 show policy rule
Use this command to display policy classification and admin rule information.
show policy rule [attribute] | [all] | [admin-profile] | [profile-index] [ether |
ipdest | ipfrag | ipproto | ipsource | iptos | llcDsapSsap | macdest | macsource |
port | tcpdestport| tcpsourceport| udpdestport | udpsourceport [data] [mask
mask] [port-string port-string] [rule-status {active | not-in-service |
not-ready}] [storage-type {non-volatile | volatile}] [vlan vlan] | [drop |
forward] [dynamic-pid dynamic-pid] [cos cos] [admin-pid admin-pid]
[-verbose]
Syntax Description
attribute Displays the attributes of the specified rules.
all |
admin-profile |
profile-index
Displays all admin and classification rules, rules for the
admin profile, or for a specific profile-index
number. Valid
index values are 1 - 1023.
ether Displays Ethernet type II rules.
ipdest Displays IP destination address rules.
ipfrag Displays IP fragmentation rules.
ipproto Displays IP protocol field in IP packet rules.
ipsource Displays IP source address rules.
iptos Displays Type of Service rules.
llcDsapSsap Displays 802.3 DSAP/SSAP rules.
macdest Displays MAC destination address rules.
macsource Displays MAC source address rules.
port Displays port related rules.
tcpdestport Displays TCP destination port rules.
tcpsourceport Displays TCP source port rules.
udpdestport Displays UDP destination port rules.
udpsourceport Displays UDP source port rules.