![](http://pdfasset.owneriq.net/3/88/3884ec60-08cc-bac4-b176-2f6590d63c88/3884ec60-08cc-bac4-b176-2f6590d63c88-bg493.png)
Security Configuration Command Set
Configuring RADIUS
Matrix NSA Series Configuration Guide 14-11
Table 14-1 provides an explanation of the command output.
Table 14-1 show radius Output Details
Output What It Displays...
RADIUS state Whether the RADIUS client is enabled or disabled.
RADIUS retries Number of retry attempts before the RADIUS server times
out. The default value of 3 can be reset using the set radius
command as described in Section 14.3.2.2.
RADIUS timeout Maximum amount of time (in seconds) to establish contact
with the RADIUS server before retry attempts begin. The
default value of 20 can be reset using the set radius
command as described in Section 14.3.2.2.
RADIUS Server IP address, UDP authentication port, authentication realm
type (management, network or any), and status (whether
or not the RADIUS server has been configured).