Filter
Top Products
Policy Classification Configuration Command Set
Assigning Classification Rules to Policy Profiles
Matrix NSA Series Configuration Guide 8-29
8.3.2.3 set policy classify
Use this command to assign incoming untagged frames to a specific policy profile, classification
and to VLAN or Class-of-Service classification rules.
set policy classify profile-index classify-index {vlan | cos} {classify-value |
forward | drop} {ether | llc | iptos | ipproto | ipxclass | ipxtype | ipsource | ipdest
| ipxsource | ipxdest | udpportsource | udpportdest | tcpportsource | tcpportdest
| ipxsourcesocket | ipxdestsocket | macsource | macdest | ipfrag | icmptype |
vlantag | tci | port} [class-data-val] [class-data-mask]
Syntax Description
NOTE: Classification rules are automatically enabled when created.
profile-index Specifies that this is an administrative rule or associates
this classification rule with a policy profile index
configured with the set policy profile command
(Section 8.3.1.2). Valid profile-index values are 1- 1023.
classify-index Policy Classification Index (1-65535)
vlan Specifies Vlan Classification Rule
cos Specifies Class Of Service Classification Rule
classify-value vlan / Class Of Service (0-4095)
forward Specifies Forwarding of packet
drop Specifies Dropping of packet
ether Classifies based on type field in Ethernet II packet.
llc DSAP/SSAP pair in 802.3 type packet field - (0 - 65535)
iptos Classifies based on Type of Service field in IP packet.
ipproto Classifies based on protocol field in IP packet.
ipsource Classifies based on source IP address
ipdest Classifies based on destination IP address
udpportsource UDP port source - (0 - 65535)
udpportdest UDP port destination - (0 - 65535)