Policy Classification Configuration Command Set
Configuring Policy Class of Service (CoS)
8-50 Matrix NSA Series Configuration Guide
Example
This example shows how to display all Class of Service port type information. In this case, no new
port groups have been configured:
Table 8-5 provides an explanation of the command output.
Matrix(rw)->show cos port-type
Number of resources: Supported rate types:
txq = transmit queue(s) perc = percentage
irl = inbound rate limiter(s) pps = packets per second
orl = outbound rate limiter(s) Kbps = kilobits per second
Mbps = megabits per second
Gbps = gigabits per second
Tbps = terabits per second
Number of
slices /
Port type Number of Supported Eligible Unselected
Index description queues rate type ports ports
----- ------------ --------- --------- ----------------- --------------
0 DFE-P 16Q 64/16 perc ge.1.1-12 ge.1.1-12
Kbps
Mbps
Gbps
1 DFE-P 4Q 32/4 perc ge.2.1-30; ge.2.1-30;
Kbps ge.3.1-30; ge.3.1-30;
Mbps ge.4.1-30; ge.4.1-30;
Gbps fe.6.1-48; fe.6.1-48;
ge.6.1-6; ge.6.1-6;
fe.7.1-72 fe.7.1-72
Port type Number of Supported Eligible Unselected
Index description limiters rate type ports ports
----- ------------ --------- --------- ----------------- --------------
0 DFE-P 32 IRL 32 irl perc ge.1.1-12 ge.1.1-12
Kbps
Mbps
Gbps
1 DFE-P 8 IRL 8 irl perc ge.2.1-30; ge.2.1-30;
Kbps ge.3.1-30; ge.3.1-30;
Mbps ge.4.1-30; ge.4.1-30;
Gbps fe.6.1-48; fe.6.1-48;
ge.6.1-6; ge.6.1-6;
fe.7.1-72 fe.7.1-72