![](http://pdfasset.owneriq.net/3/88/3884ec60-08cc-bac4-b176-2f6590d63c88/3884ec60-08cc-bac4-b176-2f6590d63c88-bg4f5.png)
Security Configuration Command Set
Configuring Convergence End Points (CEP) Phone Detection
Matrix NSA Series Configuration Guide 14-109
14.3.8.7 set cep policy
Use this command to set a global default policy for a CEP detection type. This is the policy that will
be applied when a phone of the specified type is detected on a port. It must be configured using the
policy management commands described in Chapter 8.
set cep policy {cisco | h323 | siemens | sip} index
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to assign policy index 1 to all H.323 phones detected
:
cisco Set the Cisco global default policy index.
h323 Set the H323global default policy index.
siemens Set the Siemens global default policy index.
sip Set the SIP global default policy index.
index Set the policy index value. This must be configured using
the policy management commands described in Chapter 8.
Valid values are 1 - 65535.
Matrix>set cep policy h323 1