Filter
Top Products
Configuring LACP
Configuring Link Aggregation
Matrix NSA Series Configuration Guide 4-117
asyspri asyspri Sets the port’s actor system priority. The LACP
implementation on the Matrix Series device uses this
value to determine aggregation precedence when there
are two devices competing for the same aggregator. Valid
values are 0 - 65535, with higher precedence given to
lower values.
NOTE: Only one LACP system priority can
be set on a Matrix Series device, using either
this command, or the set lacp asyspri
command (Section 4.5.4.4).
aadminstate
lacpactive |
lacptimeout |
lacpagg | lacpsync |
lacpcollect |
lacpdist | lacpdef |
lacpexpire
Sets the port’s actor LACP administrative state to allow
for:
• lacpactive - Transmitting LACP PDUs.
• lacptimeout - Transmitting LACP PDUs every 1 sec.
vs 30 sec. (default).
• lacpagg - Aggregation on this port.
• lacpsync - Transition to synchronization state.
• lacpcollect - Transition to collection state.
• lacpdist - Transition to distribution state.
• lacpdef - Transition to defaulted state.
• lacpexpire - Transition to expired state.
padminsyspri
padminsyspri
Sets a default value to use as the port’s partner priority.
Valid values are 0 - 65535, with lower values given
higher priority.
padminsysid
padminsysid
Sets a default value to use as the port’s partner system ID.
This is a MAC address.
padminkey
padminkey
Sets a default value to use as the port’s partner admin
key. Only ports with matching admin keys are allowed to
aggregate. Valid values are 1 - 65535.
padminportpri
padminportpri
Sets a default value to use as the port’s partner port
priority. Valid values are 0 - 65535, with lower values
given higher priority.
padminport
padminport
Sets a default value to use as the port’s partner admin
value. Valid values are 1 - 65535.