![](http://pdfasset.owneriq.net/3/88/3884ec60-08cc-bac4-b176-2f6590d63c88/3884ec60-08cc-bac4-b176-2f6590d63c88-bg536.png)
Security Configuration Command Set
Configuring Policy-Based Routing
14-174 Matrix NSA Series Configuration Guide
Command Defaults
• If permit or deny is not specified, this command will enable route map or
policy based routing configuration mode.
• If sequence-number is not specified, 10 will be applied.
Example
This example shows how to create route map 101 with a sequence order of 20:
Matrix>Router1(config)#route-map 101 permit 20