![](http://pdfasset.owneriq.net/3/88/3884ec60-08cc-bac4-b176-2f6590d63c88/3884ec60-08cc-bac4-b176-2f6590d63c88-bga9.png)
Preparing the Device for Router Mode
Reviewing and Configuring Routing
Matrix NSA Series Configuration Guide 2-143
2.3.2.4 router
Use this command to enable routing mode on a module. This must be a module previously
configured for routing using the set router command as described in Section 2.3.2.2. Routing may
be configured on one or two modules.
In the Matrix DFE-Gold Series chassis and N standalone devices, routing must be
configured on module 1. router module
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable routing on module 1:
module Specifies the module on which to enable routing mode.
Matrix(rw)->router 1