Logging And Network Management Command Set
Managing Switch Network Addresses and Routes
Matrix NSA Series Configuration Guide 11-111
11.2.5.10 show port mac
Use this command to display the MAC address(es) for one or more ports. These are port MAC
addresses programmed into the device during manufacturing. To show the MAC addresses learned
on a port through the switching process, use the show mac command as described in
Section 11.2.5.11.
show port mac [port-string]
Syntax Description
Command Defaults
If port-string is not specified, MAC addresses for all ports will be displayed.
Command Mode
Read-Only.
Example
This example shows how to display the MAC address for 1-Gigabit Ethernet port 4 in port group 2:
port-string (Optional) Displays MAC addresses for specific port(s).
For a detailed description of possible port-string values,
refer to Section 4.1.1.
Matrix(rw)->show port mac fe.2.4
Port MAC Address
------------ ----------------------
fe.2.4 00-01-F4-DA-32-FE