Filter
Top Products
SNMP Configuration Command Set
Configuring SNMP Access Rights
Matrix NSA Series Configuration Guide 5-27
5.3.3.1 show snmp access
Use this command to display access rights and security levels configured for SNMP one or more
groups.
show snmp access [groupname] [security-model {v1 | v2c | usm}]
[noauthentication | authentication | privacy] [context context] [volatile |
nonvolatile | read-only]
Syntax Description
Command Defaults
• If groupname is not specified, access information for all SNMP groups will be
displayed.
• If security-model is not specified, access information for all SNMP versions
will be displayed.
• If noauthentication, authentication or privacy are not specified, access
information for all security levels will be displayed.
• If context is not specified, all contexts will be displayed.
• If volatile, nonvolatile or read-only are not specified, all entries of all storage
types will be displayed.
Command Type
Switch command.
groupname (Optional) Displays access information for a specific
SNMPv3 group.
security-model v1 |
v2c | usm
(Optional) Displays access information for SNMP
security model version 1, 2c or 3 (usm).
noauthentication |
authentication |
privacy
(Optional) Displays access information for a specific
security level.
context context (Optional) Displays access information for a specific
context. For a description of how to specify SNMP
contexts, refer to Section 5.1.4.
volatile |
nonvolatile |
read-only
(Optional) Displays access entries for a specific storage
type.