Port Configuration Command Set
Setting Console Port Properties
4-10 Matrix NSA Series Configuration Guide
4.3.1.5 clear console baud
Use this command to clear the baud rate for one or more console ports.
clear console baud [port-string]
Syntax Description
Command Defaults
If port-string is not specified, baud rate will be cleared for all console ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear the baud rate on console port com.1.1:
port-string (Optional) Clears baud rate for specific port(s).
Matrix(rw)->clear console baud com.1.1