Security Configuration Command Set
Configuring Port Web Authentication (PWA)
Matrix NSA Series Configuration Guide 14-65
14.3.6.10 set pwa ipaddress
Use this command to set the PWA IP address. This is the IP address of the end station from which
PWA will prevent network access until the user is authenticated.
set pwa ipaddress ip-address
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set a PWA IP address of 1.2.3.4:
ip-address Specifies a globally unique IP address. This same value
must be configured into every authenticating switch in
the domain.
Matrix(rw)->set pwa ipaddress 1.2.3.4