Security Configuration Command Set
Configuring MAC Locking
Matrix NSA Series Configuration Guide 14-129
14.3.9.9 set maclock static
Use this command to restrict MAC locking on a port to a maximum number of static (management
defined) MAC addresses for end stations connected to that port.
set maclock static port_string value
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to restrict MAC locking to 4 static addresses on fe.2.3:
port_string Specifies the port on which to limit MAC locking. For a
detailed description of possible port_string values, refer
to Section 4.1.1.
value Specifies the number of static MAC addresses to be
allowed connections to the port. Valid values are 0 to 20.
Matrix(rw)->set maclock static fe.2.3 4