![](http://pdfasset.owneriq.net/3/88/3884ec60-08cc-bac4-b176-2f6590d63c88/3884ec60-08cc-bac4-b176-2f6590d63c88-bg72.png)
General Configuration Command Set
Setting Basic Device Properties
2-88 Matrix NSA Series Configuration Guide
2.2.3.37 set physical assetid
Use this command to set the asset ID for a module.
set physical assetid module module string
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the asset ID information for module 1 to “dfe1”:
NOTE: Module, slot and certain other hardware-based parameters in the Matrix N
Series Standalone (NSA) CLI support only chassis based N Series devices, such as the
N7, N5, N3 or N1. Executing commands in the NSA CLI with modular parameters not
supported by the standalone will result in an error message.
module module Sets an asset ID for a specific module.
string Specifies the asset ID.
Matrix(rw)->set physical assetid module 1 dfe1