![](http://pdfasset.owneriq.net/3/88/3884ec60-08cc-bac4-b176-2f6590d63c88/3884ec60-08cc-bac4-b176-2f6590d63c88-bg268.png)
VLAN Configuration Command Set
Enabling/Disabling GVRP
7-44 Matrix NSA Series Configuration Guide
7.3.6.6 clear garp timer
Use this command to reset GARP timers back to default values.
clear garp timer {[join] [leave] [leaveall]} port-string
Syntax Description
Command Defaults
At least one optional parameter must be entered.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the GARP leave timer to 60 centiseconds on Fast Ethernet port 5
in port group 2:
join (Optional) Resets the join timer to 20 centiseconds.
leave (Optional) Resets the leave timer to 60 centiseconds.
leaveall (Optional) Resets the leaveall timer to 1000 centiseconds.
port-string Specifies the port(s) on which to reset GARP timer(s). For a
detailed description of possible port-string values, refer to
Section 4.1.1.
Matrix(rw)->clear garp timer leave fe.2.5