Enterasys Networks N Standalone (NSA) Series Switch User Manual


  Open as PDF
of 1372
 
Discovery Protocols Command Set
Link Layer Discovery Protocol and LLDP-MED
Matrix NSA Series Configuration Guide 3-61
3.2.4.24 clear lldp port network-policy
Use this command to return network policy for a set of applications on a port or range of ports to
default values.
clear lldp port network-policy {all | voice | voice-signaling | guest-voice |
guest-voice-signaling | softphone-voice | video-conferencing | streaming-video
| video-signaling} {[state ] [ tag ] [vid ] [cos ] [dscp ] } port-string
Syntax Description
all Command will be applied to all applications.
voice Command will be applied to the voice application.
voice-signaling Command will be applied to the voice signaling
application.
guest-voice Command will be applied to the guest voice application.
guest-voice-signaling Command will be applied to the guest voice signaling
application.
softphone-voice Command will be applied to the softphone voice
application.
video-conferencing Command will be applied to the video conferencing
application.
streaming-video Command will be applied to the streaming video
application.
video-signaling Command will be applied to the video signaling
application.
state (Optional) Clear the state of advertising the application
information being configured to disabled.
tag (Optional) Clear the tag value of the application being
configured to untagged.
vid (Optional) Clear the VLAN identifier for the port to the
default value of 1.
cos (Optional) Clear the Layer 2 priority to be used for the
application being configured to the default value of 0.
(A value of 0 represents use of the default priority as
defined in IEEE 802.1D.)