General Configuration Command Set
Setting Basic Device Properties
Matrix NSA Series Configuration Guide 2-79
2.2.3.30 set length
Use this command to set the number of lines the CLI will display.
set length screenlength
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the terminal length to 50:
screenlength Sets the number of lines in the CLI display. Valid values
are 0, which disables the scrolling screen feature described
in Section 2.1.6.8, and from 5 to 512.
Matrix(rw)->set length 50