Filter
Top Products
Discovery Protocols Command Set
Link Layer Discovery Protocol and LLDP-MED
Matrix NSA Series Configuration Guide 3-39
Note that the information fields displayed by the show lldp port remote-info command will vary,
depending on the type of remote device that is connected to the port.
Table 3-5 describes the output fields that are unique to the remote system information database.
Refer to Table 3-4 on page 34 for descriptions of the information fields that are common to both the
local and the remote system information databases.
Network Policy
(app/tag/vlanId/cos/dscp) : voice/untagged/0/6/46
Hardware Revision : 4610D01A
Firmware Revision : b10d01b2_7.bin
Software Revision : a10d01b2_7.bin
Serial Number : 05GM42004348
Manufacturer : Avaya
Model Number : 4610
Table 3-5 show lldp port remote-info Output Display
Output Field What it Displays ...
Remote Port Id Displays whatever port Id information received in the LLDPDU from
the remote device. In this case, the port Id is MAC address of remote
device.
Device Type Mandatory LLDP-MED Capabilities TLV. Displayed only when the
port is connected to an LLDP-MED-capable endpoint device.
Hardware Revision LLDP-MED Extensions Inventory Management TLV component.
Firmware Revision LLDP-MED Extensions Inventory Management TLV component.
Sofware Revision LLDP-MED Extensions Inventory Management TLV component.
Serial Number LLDP-MED Extensions Inventory Management TLV component.
Manufacturer LLDP-MED Extensions Inventory Management TLV component.
Model Number LLDP-MED Extensions Inventory Management TLV component.
Asset ID LLDP-MED Extensions Inventory Management TLV component. In
the above example, no asset ID was received from the remote device so
the field is not displayed.