Port Configuration Command Set
Setting Auto-Negotiation and Advertised Ability
4-58 Matrix NSA Series Configuration Guide
4.3.6.7 set port advertise
Use this command to enable or disable and to configure the advertised ability on one or more ports.
set port advertise port-string [10t] [10tfd] [100tx] [100txfd] [1000x] [1000xfd]
[1000t] [1000tfd] [pause] [apause] [spause] [bpause]
Syntax Description
Command Defaults
At least one optional parameter must be specified.
Command Type
Switch command.
port-string Specifies the port(s) for which to set advertised ability. For
a detailed description of possible port-string values, refer to
Section 4.1.1.
10t (Optional) Advertises 10BASE-T half duplex mode.
10tfd (Optional) Advertises 10BASE-T full duplex mode.
100tx (Optional) Advertises 100BASE-TX half duplex mode.
100txfd (Optional) Advertises 100BASE-TX full duplex mode.
1000x (Optional) Advertises 1000BASE-X, -LX, -SX, -CX half
duplex mode.
1000xfd (Optional) Advertises 1000BASE-X, -LX, -SX, -CX full
duplex mode.
1000t (Optional) Advertises 1000BASE-T half duplex mode.
1000tfd (Optional) Advertises 1000BASE-T full duplex mode.
pause (Optional) Advertises PAUSE for full-duplex links.
apause (Optional) Advertises asymmetric PAUSE for full-duplex
links.
spause (Optional) Advertises symmetric PAUSE for full-duplex
links.
bpause (Optional) Advertises asymmetric and symmetric PAUSE
for full-duplex links