![](http://pdfasset.owneriq.net/3/88/3884ec60-08cc-bac4-b176-2f6590d63c88/3884ec60-08cc-bac4-b176-2f6590d63c88-bg117.png)
Port Configuration Command Set
Setting Speed and Duplex Mode
Matrix NSA Series Configuration Guide 4-43
4.3.4.2 set port speed
Use this command to set the default speed of one or more ports. This setting only takes effect on
ports that have auto-negotiation disabled.
set port speed port-string {10 | 100 | 1000}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set Fast Ethernet port 3 in port group 3 to a port speed of 10 Mbps:
port-string Specifies the port(s) for which to a speed value will be
set. For a detailed description of possible port-string
values, refer to Section 4.1.1.
10 | 100 | 1000 Specifies the port speed. Valid values are: 10 Mbps,
100 Mbps, or 1000 Mbps.
Matrix(rw)->set port speed fe.3.3 10