![](http://pdfasset.owneriq.net/3/88/3884ec60-08cc-bac4-b176-2f6590d63c88/3884ec60-08cc-bac4-b176-2f6590d63c88-bg375.png)
Logging And Network Management Command Set
Configuring Node Aliases
Matrix NSA Series Configuration Guide 11-143
Command Defaults
• If protocol is not specified, node alias entries for all protocols will be
displayed.
• If port-string is not specified, node alias entries will be displayed for all ports.
Command Mode
Read-Only.
Example
This example shows how to display node alias entries for BPDU traffic on MAC addresses
beginning with 00-e0. Refer back to Table 11-15 for a description of the command output.
Matrix(rw)->show nodealias mac 00-e0 bpdu
Port: lag.0.1 Time: 0 days 01 hrs 34 mins 53 secs
--------------------------------------------------------
Alias ID = 306783575 Active = true
Vlan ID = 1 MAC Address = 00-e0-63-59-f4-3d
Protocol = bpdu
Port: lag.0.1 Time: 0 days 01 hrs 34 mins 54 secs
--------------------------------------------------------
Alias ID = 306783579 Active = true
Vlan ID = 1 MAC Address = 00-e0-63-59-f4-55
Protocol = bpdu
Port: ge.3.14 Time: 0 days 00 hrs 00 mins 46 secs
--------------------------------------------------------
Alias ID = 613566759 Active = true
Vlan ID = 1 MAC Address = 00-e0-63-97-4b-69
Protocol = bpdu
Port: ge.3.17 Time: 0 days 03 hrs 03 mins 52 secs
--------------------------------------------------------
Alias ID = 613566837 Active = true
Vlan ID = 1 MAC Address = 00-e0-63-97-d0-a0
Protocol = bpdu