![](http://pdfasset.owneriq.net/3/88/3884ec60-08cc-bac4-b176-2f6590d63c88/3884ec60-08cc-bac4-b176-2f6590d63c88-bg11b.png)
Port Configuration Command Set
Enabling / Disabling Jumbo Frame Support
Matrix NSA Series Configuration Guide 4-47
4.3.5.1 show port jumbo
Use this command to display the status of jumbo frame support and maximum transmission units
(MTU) on one or more ports.
show port jumbo [port-string]
Syntax Description
Command Defaults
If port-string is not specified, jumbo frame support status for all ports will display.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the status of jumbo frame support for ge.1.1:
port-string (Optional) Displays the status of jumbo frame support
for specific port(s). For a detailed description of
possible port-string values, refer to Section 4.1.1.
Matrix(rw)->show port jumbo ge.1.1
Port Number Jumbo Oper Status Jumbo Admin Status Jumbo MTU
----------- ----------------- ------------------ ---------
ge.1.1 Disabled Disabled 10239