Filter
Top Products
Policy Classification Configuration Command Set
Configuring Policy Profiles
8-6 Matrix NSA Series Configuration Guide
8.3.1.2 set policy profile
Use this command to create a policy profile entry.
set policy profile profile-index [name name] [pvid-status {enable | disable}]
[pvid pvid] [cos-status {enable | disable}] [cos cos] [egress-vlans egress-vlans]
[forbidden-vlans forbidden-vlans] [untagged-vlans untagged-vlans] [append]
[clear]
Syntax Description
profile-index Specifies an index number for the policy profile. Valid
values are 1 - 1023.
name name (Optional) Specifies a name for the policy profile. This is a
string from 1 to 64 characters.
pvid-status
enable | disable
(Optional) Enables or disables PVID override for this
policy profile. If all the classification rules associated with
this profile are missed, then this parameter, if specified,
determines default behavior.
pvid pvid (Optional) Specifies the PVID to assign to packets, if PVID
override is enabled and invoked as the default behavior.
cos-status enable
| disable
(Optional) Enables or disables Class of Service override for
this policy profile. If all the classification rules associated
with this profile are missed, then this parameter, if
specified, determines default behavior.
cos cos (Optional) Specifies a COS value to assign to packets, if
CoS override is enabled and invoked as the default
behavior. Valid values are 0 to 255.
egress-vlans
egress-vlans
(Optional) Specifies that the port to which this policy
profile is applied should be added to the egress list of the
VLANs defined by egress-vlans. Packets will be formatted
as tagged.
forbidden-vlans
forbidden-vlans
(Optional) Specifies that the port to which this policy
profile is applied should be added as forbidden to the egress
list of the VLANs defined by forbidden-vlans. Packets from
this port will not be allowed to participate in the listed
VLANs.